|
Standard Steel Frames
Our standard steel frames are constructed of 1-inch 705-6 engineered steel tubing with .065 wall thickness. Unlike many other manufacturers who use EMT conduit, we are extremely environmentally conscious and prefer to prevent the zinc and lead emissions that this galvanized tubing emits when welded. We prefer to go the extra mile to insure the quality of our frames and every steel frame is delivered with our high quality, envornmentally friendly, in house powder coating!
All RecreTec frames come with 3,500 lb. nylon straps with 1-inch cam buckes. Floor panels and seats are constructed of marine-grade plywood and covered with a skid and water-resistant material.
|
Rec 72 Two Man Cat Frame
Our Rec 72 Front Position Power Cat Frame is our "Sport Utility" allowing for forward weight placement to punch through the biggest boilers when you are spinning around on your own and accomodating for overnight trips with both a cooler and a dry box bay. This frame screams versatility!
Available in one piece or break down. Standard or Rock Crusher Series sized tubing in Steel or Aluminum. Note - we do not recommend Break Down Frames for Cat Boats.
|
 
Rec 72 Standard Steel Frame
Rec 72 Standard Steel Frame
|
 
Rec 72 Standard Steel Frame
 
Rec 72 Standard Steel Frame
 
Rec 72 Standard Steel Frame
|
| Retail Prices |
|
Approx. Weight |
| Rec 72 Two Man Cat Frames |
$595 |
59 lbs |
| Additions |
|
|
| Dual Rails w/1 set of adjustable Oar Towers |
$150 |
|
| Retail Prices |
|
Approx. Weight |
| Small/Day Cat Frames |
$529 |
35 lbs |
| Additions |
|
|
| Dual Rails w/1 set of adjustable Oar Towers |
$150 |
|
|
Tunnel Cat
The Lamborghini upgrade to our already sporty cat frame! Incorporating a raised tunnel bridge chute through the center of the frame, this is a must upgrade for you guys the lay havock to the Upper Sandy, the Umpqua in Summer and the Clackamas anytime! When the rock is going between our tubes you better hope you have this frame that gives you "straddle clearances."
Available in one piece or break down. Standard or Rock Crusher Series sized tubing in Steel or Aluminum. Note - we do not recommend Break Down Frames for Cat Boats.
|
Tunnel Cat
|
|
| Retail Prices |
|
Approx. Weight |
| Tunnel Cat Frame |
$895 |
35 lbs. |
| Additions |
|
|
| Dual Rails w/1 set of adjustable Oar Towers |
$150 |
|
| Retail Prices |
|
Approx. Weight |
| Oddysey Frames |
$549 |
55 lbs. |
| Additions |
|
|
| Dual Rails w/1 set of adjustable Oar Towers |
$150 |
|
|
The Outfitter™ — Built Tough for Normal or Expedition Use
A tough river runner for commercial or expedition use, the Outfitter is available in either steel or aluminum, one-piece or take-down configurations, and has several options available.
The Standard Outfitter model has seats and room for a cooler, with a Skidgard™ rower's seat over the rear thwart (with an adjustable footbar) and another Skidgard seat over the front thwart for passengers. The cooler sits in a frame behind the passenger seat.
In expedition configuration, the Outfitter is available with aluminum dry boxes. Just order the optional Packer Bars, and the aluminum dry boxes will drop between the bars and rest on welded brackets. Oarlock stands bolt to plates on side rails and are adjustable. The dropped center section holds the cooler frame and footbar, and has riveted nylon cooler retention straps.
|
 
Outfitter shown with dual rail option
Outfitter shown with dual rail option
|
 
Outfitter shown with dual rail option
 
Outfitter shown with dual rail option
 
Outfitter shown with dual rail option
|
| Retail Prices |
|
Approx. Weight |
| Outfitter Frames |
$609 |
60 lbs. |
| Additions |
|
|
| Dual Rails w/1 set of adjustable Oar Towers |
$150 |
|
Cargo/ Cooler Module
Providing a high degree of flexibility, these separate modules allow you to use your single-tube catarafts alone or in any combination. Use the Rower and/or the Cargo Modules with short catarafts, or all three with a larger (i.e. 14-foot or more) cataraft.
Featuring racks for an adjustable tractor-style seat, the Rower Module is 48-inches long with adjustable oarlock stands, an adjustable footbar and a Skidgard floor.
The 40-inch Passenger Module has a Skidgard bench seat and floor.
The 30-inch Cargo has a Skidgard floor only.
Given sufficient raft capacity, you could replace the rower and passenger seats with dry boxes.
Standard modules are of steel construction in a single unit construction. Aluminum construction and take-down versions are available as options.
Center width is generally 44-inches for 14-foot/24-inch tube catarafts, but may be modified. |
 |
|
Retail Prices
|
|
Approx. Weight |
18"-24" Cat Module
|
$219 |
|
25"-36" Cat Module
|
$230
|
|
37"-48" Cat Module
|
$245
|
|
| Additions |
|
|
Skid Guard Floors 18"-24"
|
$70
|
|
Skid Guard Floors 25"-36"
|
$80
|
|
Skid Guard Floors 37"-48"
|
$90
|
|
|
|
|
| Sport/Fisher Frame |
|
|
| Retail Prices |
|
Approx. Weight |
| Sport/Fisher Frame |
$529 |
40 lbs. |
| Additions |
|
|
| Dual Rails w/1 set of adjustable Oar Towers |
$150 |
|
| Economy Frame |
|
|
| Retail Prices |
|
Approx. Weight |
| Economy 1-pc Frame |
$399 |
30 lbs. |
| Economy T/D Frame |
$449 |
32 lbs. |
|
Additions
|
|
|
| Dual Rails w/1 set of adjustable Oar Towers |
$150 |
|
| Retail Prices |
|
Approx. Weight |
| Stern Rower |
$329 |
25 lbs. |
Additions
|
|
|
|
|
|
|
|
|
|
|
